Process information
| Key Data Set Information | |||
| Location | ES | ||
| Geographical representativeness description | España | ||
| Reference year | 2026 | ||
| Name |
| ||
| Use advice for data set | Declared modules: A1 Raw materials supply A2 Transport A3 Manufacturing A4 Transport A5 Construction - Installation process C1 De-construction C2 Transport C3 Waste processing C4 Disposal D Reuse, recovery, recycling potential Reference Lifetime (RSL): Characteristics and properties of the product: Requirements (conditions of use, frequency of maintenance, repair, etc.): | ||
| Technical purpose of product or process | The product in question is Beyem NeoCal Term, a dry industrial mortar for colored decorative coatings, formulated with lime, lightened with natural cork, flexible, breathable, and water-repellent. It is supplied in powder form, has an approximate bulk density of 1,100 kg/m³, and an average coverage of 1.4 kg/m² per millimeter of thickness, for a typical application thickness of between 4 and 6 mm. The product is classified as CR CS III Wc2, in accordance with UNE-EN 998-1:2017. It is manufactured at the Rodacal Beyem, S.L. plant, located in La Roda (Albacete), from where it is distributed through the company’s logistics network. Beyem NeoCal Term is used as a decorative finish on facades and as a component of exterior thermal insulation systems, providing water protection, vapor permeability, and an aesthetic finish. This Environmental Product Declaration covers the entire range of colors available for Beyem NeoCal Term mortar. The available shades can be found in the color chart published on the Rodacal Beyem website: www.rodacal.com. The calculated results represent the average product of the Beyem NeoCal Term color range. To obtain this average product, the different formulations were weighted according to the quantities actually manufactured during the study’s reference period. Therefore, the declared results do not correspond to a single color, but rather to the weighted average environmental impact of the set of colors marketed during the analyzed period. | ||
| Classification |
Class name
:
Hierarchy level
| ||
| General comment on data set | The product in question is Beyem NeoCal Term industrial dry mortar, a colored decorative lime coating that is lightened with natural cork, flexible, breathable, and water-repellent. The product under study is supplied in powder form, with a bulk density of ≈ 1100 kg/m³ and an average coverage of ≈ 1.4 kg/m² per mm of thickness, and represents the average color production at the Rodacal Beyem S.L. plant. The mortar, used as a decorative finish and as part of external thermal insulation systems (ETIS), serves the primary functions of water repellency, breathability, and aesthetic finishing. | ||
| Copyright | Yes | ||
| Owner of data set | |||
| Quantitative reference | |||
| Reference flow(s) |
| ||
| Biogenic carbon content |
| ||
| Time representativeness | |||
| Data set valid until | 2031 | ||
| Time representativeness description | 2026/07/31 - 2031/07/31 | ||
| Technological representativeness | |||
| Technology description including background system | Product components: Aggregates, mineral fillers, and functional minerals: 0.7720 kg (77.20%) Binders: 0.1344 kg (13.44%) Polymers, resins, and functional organic additives: 0.0516 kg (5.16%) Lightening agents: 0.0249 kg (2.49%) Pigments and colour additives: 0.0110 kg (1.10%) Minor performance additives: 0.0063 kg (0.63%) TOTAL: 1.00 kg (100.00%): The packaging materials associated with the declared unit (1 kg) are: Packaging item 1 - Paper (bag): 3.75E-03 kg. Packaging item 2 - Plastic (HDPE bag + LDPE pallet wrap + LDPE sheet under the pallet): 9.59E-04 kg. Packaging material 3 - Wood (pallet): 1.17E-02 kg. <hr> | ||
Modelling and validation
| Type of data set | EPD | ||||
| Subtype | specific dataset | ||||
| LCA methodology report | |||||
| Data sources, treatment and representativeness | |||||
| Documentation of data quality management | |||||
| Data source(s) used for this data set |
| ||||
| Completeness | |||||
| Validation | |||||
| |||||
| Compliance Declarations | |||||
| Compliance |
Compliance system name
|
Approval of overall compliance
Fully compliant |
Nomenclature compliance
Fully compliant |
Methodological compliance
Fully compliant |
Review compliance
Fully compliant |
Documentation compliance
Fully compliant |
Quality compliance
Fully compliant |
| Compliance |
Compliance system name
|
Approval of overall compliance
|
Nomenclature compliance
|
Methodological compliance
|
Review compliance
|
Documentation compliance
|
Quality compliance
|
Administrative information
| Commissioner and goal | |
| Commissioner of data set | |
| Data generator | |
| Data set generator / modeller | |
| Data entry by | |
| Time stamp (last saved) | 2026-07-31T12:22:32 |
| Data set format(s) |
|
| Data entry by | |
| Publication and ownership | |
| UUID | 2db8dd54-7420-4bac-b0f2-716b48339bd9 |
| Date of last revision | 2026-07-31T12:22:32+02:00 |
| Data set version | 00.02.000 |
| Preceding Data set version | |
| Registration authority | |
| Registration number | DAPcons®.100.292 |
| Owner of data set | |
| Copyright | Yes |
| License type | Free of charge for all users and uses |
| Access and use restrictions | Your use of this material is subject to the General Terms of Use published on by EPD International AB:s homepage at https://www.environdec.com/contact/General-terms-of-use/. If you have not accepted EPD International AB:s the General Terms of Use, you are not authorized to exploit this work in any manner. |
Environmental indicators
Indicators of life cycle