Process information
| Key Data Set Information | |
| Location | ES |
| Geographical representativeness description | España |
| Reference year | 2023 |
| Name |
|
| Use advice for data set | Declared modules: A1 Raw materials supply A2 Transport A3 Manufacturing A4 Transport A5 Construction - Installation process B1 Use B2 Maintenance B3 Repair B4 Replacement B5 Refurbishment B6 Operational energy use B7 Operational water use C1 De-construction C2 Transport D Reuse, recovery, recycling potential C4 Disposal C3 Waste processing Requirements (conditions of use, frequency of maintenance, repair, etc.): NA Reference Lifetime (RSL): 30 years corresponding to a minimum of 200.000 use cycles Characteristics and properties of the product: TOP series panic bar |
| Technical purpose of product or process | Panic sliding device with orbital latch. The TOP range has the following features: • Rim and mortise device with one/two/three locking points. • Available in a range of finishes. • Steel latches. • Certified up to 200,000 cycles according to EN1125. • TOP rim models certified with the N mark for 2,000,000 cycles. • Door leaf width: 800, 1000 and 1200 mm. • The orbital latch is only for the rim bars; it does not apply to the mortise bars. The LCA and this environmental impact statement associated with the TOP series panic bar have been performed on the basis of the worst-case study in terms of number of components and weight of all the products in the range. Specifically, the TOP3S808GG BAR product manufactured in Eskoriatza has been analyzed (length for door leaf width of 800 mm). This is a rim device although this EPD is also representative of TOP mortise bars as it is the worst case (it has more components and is heavier). The product does not contain substances on the REACH list of hazardous substances. |
| General comment on data set | Panic sliding device with orbital latch. The TOP range has the following features: • Rim and mortise device with one/two/three locking points. • Available in a range of finishes. • Steel latches. The orbital latch is only for the rim bars; it does not apply to the mortise bars. • Certified up to 200.000 cycles according to EN 1125. • TOP rim models certified with the N mark for 2.000.000 cycles. • Door leaf width: 800, 1.000 and 1.200 mm. |
| Copyright | Yes |
| Owner of data set | |
| Quantitative reference | |
| Reference flow(s) |
|
| Time representativeness | |
| Data set valid until | 2028 |
| Time representativeness description | 2023/02/09 - 2028/02/09 |
| Technological representativeness | |
| Technology description including background system | Product components: Are detailed below.: Are detailed below. |
Modelling and validation
| Type of data set | EPD | ||||
| Subtype | specific dataset | ||||
| Data sources, treatment and representativeness | |||||
| Data source(s) used for this data set |
| ||||
| Completeness | |||||
| Validation | |||||
| |||||
| Compliance Declarations | |||||
| Compliance |
Compliance system name
|
Approval of overall compliance
Fully compliant |
Nomenclature compliance
Fully compliant |
Methodological compliance
Fully compliant |
Review compliance
Fully compliant |
Documentation compliance
Fully compliant |
Quality compliance
Fully compliant |
| Compliance |
Compliance system name
|
Approval of overall compliance
Fully compliant |
Nomenclature compliance
Fully compliant |
Methodological compliance
Fully compliant |
Review compliance
Fully compliant |
Documentation compliance
Fully compliant |
Quality compliance
Fully compliant |
Administrative information
| Commissioner and goal | |
| Commissioner of data set | |
| Data entry by | |
| Time stamp (last saved) | 2025-01-25T12:00:30 |
| Data set format(s) |
|
| Data entry by | |
| Publication and ownership | |
| UUID | 5e4f73e4-3e93-49c4-9a16-b1565d3f0faa |
| Data set version | 00.05.000 |
| Registration authority | |
| Registration number | DAPcons®.100.144 |
| Owner of data set | |
| Copyright | Yes |
| License type | Free of charge for all users and uses |
Environmental indicators
Indicators of life cycle